Datalogic Magellan 9300i - Scale Interface Type

Scale Features Enter/Exit Programming Mode
Product Reference Guide 165
Scale Interface Type
Use this feature to select the scale interface type. Choices are:.
• No scale interface
• IBM 46XX (Port 17 ignored)
• Mettler Toledo 8217
• USB (IBM ignored)
• RS-232 - SASI
• RS-232 - ICL
•Legacy ICL
•Tesco ICL
• Avery XA9 Weigh-Only
• Avery 1791
• Toledo Brazil P05
• Toledo Brazil P05A
•Dialog04/02
•Dialog06
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Scale Interface Type = No Scale Interface
Scale Interface Type = IBM 46XX (Port 17 Ignored)
Scale Interface Type = Mettler Toledo (8217 ignored)
040400(CR)
040401(CR)
040402(CR)