Datalogic Magellan 9300i - UPC;EAN Correlation

Enter/Exit Programming Mode 1D Symbology Programming
314 Magellan™ 9300i / 9400i Scanners
UPC/EAN Correlation
Enables/disables character correlation for UPC/EAN.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
UPC/EAN Correlation = Disable
UPC/EAN Correlation = Enable
DEFAULT
050700(CR)
050701(CR)