Datalogic Magellan 9300i - Digital Watermark (DWM) Data Format

Enter/Exit Programming Mode General Scanner and Scale Features
132 Magellan™ 9300i / 9400i Scanners
Digital Watermark (DWM) Data Format
Selects the format for the watermark data. Choices are:
• Compatibility mode
• Databar-14
•Native
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
The Digital Watermark feature must be enabled for decode func-
tionality.
Digital Watermark (DWM) Data Format = Compatibility mode
Digital Watermark (DWM) Data Format = Databar-14 mode
Digital Watermark (DWM) Data Format = Native mode
DEFAULT
049200(CR)
049201(CR)
049202(CR)