Datalogic Magellan 9300i User Manual

Enter/Exit Programming Mode
Product Reference Guide 349
DataBar Expanded Reverse Retry
Enables/disables the reading of out of specification labels where the last row
has been printed in reverse.
• When enabled, DataBar Expanded Stacked labels that have the last row
incorrectly printed in reverse will be re-decoded.
• When disabled, DataBar Expanded Stacked labels that have the last row
incorrectly printed in reverse will not be read.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DataBar Expanded Reverse Retry = Disable
DataBar Expanded Reverse Retry = Enable
DEFAULT
04D800(CR)
04D801(CR)

Datalogic Magellan 9300i Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Standard interfaces	RS-232
Connectivity technology	Wired
Product color	Black, Grey
Built-in display	No
Sustainability certificates	RoHS

Weight and Dimensions

Weight	- g