Enter/Exit Programming Mode 1D Symbology Programming
346 Magellan™ 9300i / 9400i Scanners
DataBar Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for
DataBar Expanded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DataBar Expanded Length Control = Variable Length
DataBar Expanded Length Control = Fixed Length
DEFAULT
To Next Page
Loading...
