Datalogic Magellan 9300i User Manual

Scanning Features Enter/Exit Programming Mode
Product Reference Guide 131
Digital Watermark (DWM) Operation Mode
Selects processing engine allocation for the watermark reader. Choices are:
• Dedicated - allocate a decode engine for exclusive use
• Shared with 2D - share the 2D decode engine
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
The Digital Watermark feature must be enabled for decode func-
tionality.
Digital Watermark (DWM) Operation Mode = Dedicated
Digital Watermark (DWM) Operation Mode =
Shared with 2D
DEFAULT
049300(CR)
049301(CR)

Datalogic Magellan 9300i Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Standard interfaces	RS-232
Connectivity technology	Wired
Product color	Black, Grey
Built-in display	No
Sustainability certificates	RoHS

Weight and Dimensions

Weight	- g