Enter/Exit Programming Mode 1D Symbology Programming
410 Magellan™ 9300i / 9400i Scanners
MSI Length Control
This feature specifies whether variable-length or fixed-length decoding will be
set for MSI.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
MSI Length Control = Variable Length
MSI Length Control = Fixed Length
DEFAULT
To Next Page
Loading...
