Enter/Exit Programming Mode
Product Reference Guide
361
Code 39 Require Margins
Enables/disables the requirement that quiet zones be present in a Code 39 bar
code.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Code 39 Require Margins = Quiet Zones Not Required
Code 39 Require Margins = Quiet Zones Required
DEFAULT
To Next Page
Loading...
