Enter/Exit Programming Mode
Product Reference Guide
315
UPC/EAN Guard Insertion
This setting enables the insertion of either a missing leading or trailing guard
to a scanned bar code.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
UPC/EAN Guard Insertion = Disable
UPC/EAN Guard Insertion = Enable
DEFAULT
To Next Page
Loading...
