Datalogic Magellan 9300i - Case Conversion

Enter/Exit Programming Mode
Product Reference Guide 267
these settings) across all symbologies (set via the Global features in this
chapter).
• You can add any character from the ASCII Character Set on page 507 (from
00-7F) on the inside back cover of this manual as a prefix, suffix or Label
ID.
• Enter prefixes and suffixes in the order in which you want them to appear
on the output.
Case Conversion
This option can change the case of all alphabetic characters to upper or lower
case.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan bar code for the desired option below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Case Conversion = No Case Conversion
Case Conversion = Upper Case
Case Conversion = Lower Case
DEFAULT
033100(CR)
033101(CR)
033102(CR)