Datalogic Magellan 9300i User Manual

Handheld Data Format Requirements General
Product Reference Guide 499
Code 39-Pharmacode (Code 32)
• Check character must be included in label data
• Label length including start, stop and check characters and excluding pre-
fix character must meet requirements imposed by the main scanner’s
fixed or variable label length control for this symbology type.
• Start and stop characters “*” must be included in label
• Prefix must be an ASCII character ‘p’
• Example: ‘p*123456789*’
Interleaved 2 of 5 (I 2 of 5)
• Check character must be included in label data
• Label length including check characters and excluding prefix character
must meet requirements imposed by the main scanner’s fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character ‘i’
• Example: ‘*i0123456789’
Codabar
• Check character must be included in label data
• Label length including check character and excluding prefix character
must meet requirements imposed by the main scanner’s fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character ‘%’
• Start stop character sets must meet the matching requirement set forth by
the scanner configuration item CI_CBAR_START_STOP_CHAR_MATCH
• Start stop character sets s must be of the form ABCD/ABCD and must be
included in the label
• Example: ‘%s$99.95s’
Code 128
• Prefix must be an ASCII character ‘#’
• Label length excluding prefix character must meet requirements imposed
by the main scanner’s fixed or variable label length control for this sym
-
bology type.
• Function characters may be transmitted as a hexadecimal value 8x. Where
x correlates to function characters 1 thru 4 as follows:
•x80 = function code 1
•x81 = function code 2
•x82 = function code 3
•x83 = function code 4
• For Code128 programming labels the format is of the general form ‘#/
82nnnnn/r ‘ - /82 is hexadecimal 82 and /r is carriage return
• Example: ‘#Code_128.Test’
MSI Plessey
• Check character must be included in label data

Datalogic Magellan 9300i Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Standard interfaces	RS-232
Connectivity technology	Wired
Product color	Black, Grey
Built-in display	No
Sustainability certificates	RoHS

Weight and Dimensions

Weight	- g