Datalogic Magellan 9300i - Page 120

Enter/Exit Programming Mode Imaging and CSS Features
108 Magellan™ 9300i / 9400i Scanners
Picture Retrieval Timeout
This feature sets the amount of time after the picture retrieval label is sent to
the POS that the scanner will allow subsequent picture taking requests via but
-
ton press.
NOTE
If set to 0, the picture retrieval timeout will not be used and a pic-
ture will remain accessible until another is taken or the scanner
is reset.
Picture Retrieval Timeout = 0
Picture Retrieval Timeout = 1 second
Picture Retrieval Timeout = 2 seconds
Picture Retrieval Timeout = 3 seconds
Picture Retrieval Timeout = 4 seconds
Picture Retrieval Timeout = 5 seconds
042300(CR)
042301(CR)
042302(CR)
042303(CR)
042304(CR)
DEFAULT
042305(CR)