Datalogic Magellan 9300i - Page 338

Enter/Exit Programming Mode 1D Symbology Programming
326 Magellan™ 9300i / 9400i Scanners
P2 Addon Minimum Read
This feature specifies the minimum number of times a P2 addon must decode
before it is marked valid.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code representing the desired option on this and the follow-
ing page. You’ll need to cover any unused bar codes on facing pages to
ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
P2 Addon Minimum Read = 2
P2 Addon Minimum Read = 3
P2 Addon Minimum Read = 4
P2 Addon Minimum Read = 5
P2 Addon Minimum Read = 6
DEFAULT
005F02(CR)
005F03(CR)
005F04(CR)
005F05(CR)
005F06(CR)