Datalogic Magellan 9300i User Manual

Enter/Exit Programming Mode
Product Reference Guide 329
P5 Addon Minimum Read
This feature specifies the minimum number of times a P5 addon must decode
before it is marked valid.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code representing the desired option on this and the follow-
ing page. You’ll need to cover any unused bar codes on facing pages to
ensure that the scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
P5 Addon Minimum Read = 1
P5 Addon Minimum Read = 2
P5 Addon Minimum Read = 3
P5 Addon Minimum Read = 4
P5 Addon Minimum Read = 5
P5 Addon Minimum Read = 6
007D01(CR)
DEFAULT
007D02(CR)
007D03(CR)
007D04(CR)
007D05(CR)
007D06(CR)

Datalogic Magellan 9300i Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Standard interfaces	RS-232
Connectivity technology	Wired
Product color	Black, Grey
Built-in display	No
Sustainability certificates	RoHS

Weight and Dimensions

Weight	- g