Datalogic Magellan 9300i

Handheld Data Format Requirements General
Product Reference Guide 505
PDF 417
•Prefix must be ASCII characters ‘]L0’ thru ']L5' ('0' thru '5' inclusive)
• Label length excluding prefix character must meet requirements imposed
by the main scanner’s fixed or variable label length control for this sym
-
bology type.
• Example : ‘]L0pdf_test_label’
Data Matrix
• Prefix must be ASCII characters `]d0' thru ']d6' ('0' thru '6' inclusive)
• Label length excluding prefix character must meet requirements imposed
by the main scanner's fixed or variable label length control for this sym
-
bology type.
• Example : `]d0dm_label_test'
Aztec
• Prefix must be ASCII characters `]z0' thru ']zC' ('0' thru 'C' inclusive 0-9,A-
C)
• Label length excluding prefix character must meet requirements imposed
by the main scanner's fixed or variable label length control for this sym
-
bology type.
• Example : `]z0aztec_label_test'
QR Code
• Prefix must be ASCII characters `]Q0' thru ']Q6' ('0' thru '6' inclusive)
• Label length excluding prefix character must meet requirements imposed
by the main scanner's fixed or variable label length control for this sym
-
bology type.
• AIM does not distinguish QR from micor QR so devices may read microQR
but transmit and be interpreted as QR.
• Example : `]Q0QR_label_test'
Labels with an "unknown" AIM Id (an AIM Id not specificed above)
• If a label is received that does not have an AIM Id specificed above, and the
first 3 label characters qualify as follows:
•the first characters is a ']'
•the second character is a capital or small letter
•the third character is a digit
•then the label type is set to GENERIC_DATA and the "unknown" AIM Id is
left appended to the beginning of the label data.