WIPERS/WASHERS
DESCRIPTION
An electrically opera ted in term itten t wiper and
washer system is stan da rd factory-inst alled sa fety
equipm ent on th is model (F ig. 1). The wiper and
washer system includes the following major compo-
nent s, which are descr ibed in further detail else-
where in this service information :
• Ch ec k Va lv e - The washer system check valve
is integral to the plumbing fitting located in the
washer plu mbing between the cowl plenu m wa sh er
hose and t he two wa sh er n ozzle hoses, and is loca ted
benea th the cowl top pa nel at the base of t he wind-
sh ield in the engine compartment.
• Mu lt i-F u n c tio n S w it c h - The mult i-funct ion
switch is secu red to the t op of the st eering column ,
just below t he steerin g wheel. Only t he left (lighting)
control stalk, right (wiper) control stalk a nd the h az-
ard warnin g switch button for th e multi-function
switch ar e visible, th e remainder of t he switch is con-
cealed beneat h the steer ing column sh rouds. The
multi-fu nction switch cont ains all of the switches for
Fig. 1 Wiper & Washer System
1 - WASHER RESERVOIR, PUMP/MOTOR, FLUID LEVEL SWITCH 4 - MULTI-FUNCTION (WIPER, WASHER, & LIGHTING) SWITCH
2 - WIPER MOTOR, LINKAGE & PIVOTS MODULE 5 - RAIN SENSOR (W/AUTOMATIC WIPERS ONLY)
3 - WIPER RELAY 6 - RAIN SENSOR CONTROL MODULE (W/AUTOMATIC WIPERS
ONLY)
8R - 2 WIPERS/WASHERS VA
To Next Page
Loading...
