(4) Remove th e bulb from the fron t turn /pa rk/side
marker bulb holder.
INSTALLATION
(1) In st all the bulb into the front turn/pa rk/side
marker bulb holder.
(2) In sert th e bulb holder stra igh t int o the front
lam p unit hou sing and rota te the bulb holder clock-
wise about 30 degrees t o lock it int o place (Fig. 25).
(3) Reconnect t he battery negative cable.
HEADLAMP LEVELING MOTOR
REMOVAL
(1) Disconn ect and isolate the battery nega tive
cable.
(2) Disengage a nd swing the retainers tha t secure
the front lamp unit r ear cover to each side of the
lam p h ousing an d r emove the cover (Fig. 26).
(3) Disconn ect the front lam p u nit wire h arn ess
connect or fr om the connector recept acle for the head-
lam p levelin g mot or (Fig. 27).
(4) Rotat e the h eadlamp levelin g motor counter-
clockwise about 30 degrees and pu ll it straight ou t
from the m ount integral to the fr ont lamp unit hou s-
ing (Fig. 28).
Fig. 25 Front Turn/Park/Side Marker Bulb Remove/
Install
1 - LAMP HOUSING
2 - BULB HOLDER
Fig. 26 Front Lamp Unit Bulbs Remove/Install
1 - COVER RETAINER (2)
2 - BULB RETAINER (3)
3 - FOG LAMP BULB (OPTIONAL)
4 - COVER
5 - LOW BEAM BULB
6 - POSITION BULB
7 - HIGH BEAM BULB
8 - TURN/PARK/SIDE MARKER BULB
9 - FRONT LAMP UNIT
Fig. 27 Headlamp Leveling Motor
1 - HOUSING
2 - REFLECTOR
3 - CONNECTOR
4 - MOTOR
5 - MOUNT
8L - 16 LAMPS/LIGHTING - EXTERIOR VA
To Next Page
Loading...
