INSTALLATION - VACUUM TRANSDUCER
(1) Position va cuum tr ansducer a nd inst all the
reta ining bolts. Tigh ten bolts to 70 lbs.in (8 N·m).
(2) Connect vacuum hoses.
(3) Connect electrical connector
(4) In st all air clean er housing (Refer to 9 -
ENGINE/AIR INTAKE SYSTE M/AIR CLEANE R
HOUSING - INSTALLATION)
(5) Connect nega tive bat tery cable.
VA EXHAUST SYSTEM 11 - 9
To Next Page
Loading...
