SPEED CONTROL
TAB LE O F CO NTE NTS
page page
SPEED CONTROL
DESCRIPTION ..........................1
OPERATION ............................2
SPECIFICATIONS
TORQUE .............................2
CABLE
DESCRIPTION ..........................2
SERVO
DESCRIPTION ..........................2
SWITCH
REMOVAL .............................3
INSTALLATION ..........................3
SPEED CON T ROL
DESCRIPTION
The speed contr ol system is electron ically con-
trolled by the Engine Control Module (ECM). A
cable and a vacuum controlled servo are not
u se d. Th is is a s e rv o-le ss s y s te m . Contr ol of the
system is accom plished by a 4-posit ion, instr umen t
pa nel mounted switch (Fig. 1).
Switch settings (Fig. 2) are:
• 1. Set / Accelera te
• 2. Res um e Set Sp eed
• 3. Set / Decelera te
• 4. Off
The syst em is designed to oper ate a t speeds a bove
25 mph (40 km/h ).
WARNING: THE USE OF SPEED CONTROL IS NOT
RECOMMENDED WHEN DRIVING CONDITIONS DO
NOT PERMIT MAINTAINING A CONSTANT SPEED,
SUCH AS IN HEAVY TRAFFIC OR ON ROADS THAT
ARE WINDING, ICY, SNOW COVERED, OR SLIP-
PERY.
Fig. 1 INSTRUMENT CLUSTER
1 - COVER
2 - BEZEL
3 - INSTRUMENT CLUSTER
4 - STEERING WHEEL
5 - MULTI-FUNCTION SWITCH
6 - SPEED CONTROL SWITCH
VA SPEED CONTROL 8P - 1
To Next Page
Loading...
