(4) Pull the ventila tion h ousing forwar d far enou gh
to disengage the housing from the studs on the dash
pa nel, t hen lower the hou sing until it rests on t he
top of th e engine.
(5) Disconn ect th e wiper motor pigta il wire connec-
tor from th e veh icle wire har ness connect or.
(6) Remove the nut an d washer th at secures each
wiper pivot h ousing to th e outside of the cowl top
pa nel (Fig. 30).
Fig. 29 Ventilation Housing
1 - NUT (5) 3 - CABIN FILTER HOUSING
2 - WASHER (5) 4 - VENTILATION HOUSING
8R - 30 WIPERS/WASHERS VA
To Next Page
Loading...
