(8) Disconn ect the EGR wiring harness connect or
(Fig. 69).
(9) Remove th e bolt ret ain ing the engine wirin g
harness to the in take ma nifold.
(10) Disconn ect th e coolant hose a t the EGR valve.
NOTE: Collect and store any fluid spillage when
disconnecting components.
(11) Disconn ect both fuel lines at the fuel filter
(Fig. 69).
(12) Remove the lower int ake m anifold support
bracket (Fig. 70).
(13) Raise and su pport t he vehicle.
(14) Remove the rear intake manifold mount ing
bolts while accessible from below.
(15) Lower th e veh icle.
Fig. 69 INTAKE MANIFOLD
1 - CLIP 6 - ENGINE OIL COOLER
2 - INTAKE MANIFOLD 7 - HIGH PRESSURE FUEL RAIL
3 - EGR VALVE 8 - COOLANT TEMPERATURE SENSOR
4 - EGR VALVE COOLANT HOSE 9 - FUEL RAIL PRESSURE SENSOR
5 - FUEL FILTER 10 - CHARGE AIR HOSE
VA ENGINE 9 - 67
To Next Page
Loading...
