ITEM FEATURES APPLICATIONS SERVICE TEMP
High Density Ure-
thane Foam
Tear resistant, highly resilient
and durable.
Between metal and metal, met-
al and plastic. Water-resistant.
Examples: I/P, heavy metal rat-
tles, isolating brackets.
-40° to 180° Fahr-
enheit
(-40° to 82° Celsius)
Open Cell Foam
Tape
Soft foam conforms to irregular
surfaces.
Wire harness and connector
wrap.
Examples: Seals, gasket, wir-
ing, heat ducts.
-40° to 180° Fahr-
enheit
(-40° to 82° Celsius)
Closed Cell Low
Density Foam Tape
Soft, conformable. Water-resis-
tant.
Wherever bulk is needed. Pre-
vents closing flutters and rat-
tles when applied to door wa-
tershield.
Examples: Door, I/P.
-40° to 180° Fahr-
enheit
(-40° to 82° Celsius)
NYE" Grease 880 Long life. Suspensions.
Examples: Strut busings, sway
bars.
-40° to 390° Fahr-
enheit
(-40° to 200° Cel-
sius)
Krytox" Oil Long life. Will not dry out or
harm plastics or rubber.
When access is not possible,
oil will migrate to condition.
Vinyl, rubber, plastic, metal.
Examples: Convertible top
bushings, pull cups trim panel
inserts.
-30° to 400° Fahr-
enheit
(-34° to 205° Cel-
sius)
Krytox" Grease Long life. Will not dry out or
harm plastics or rubber.
Vinyl, rubber, plastic, metal,
glass.
Examples: Weather-strips,
backlite and windshield mold-
ings.
-30° to 400° Fahr-
enheit
(-34° to 205° Cel-
sius)
SPECIFICATIONS
TORQUE SPECIFICATIONS
DESCRIPTION N·m Ft. Lbs. In. Lbs.
Front door check bracket bolt/nut 6 — 53
Front door check to a-pillar M6 bolts 10 — 89
Front door check to a-pillar M8 bolts 35 26 —
Front door check to door fasteners 10 — 89
Front door exterior handle 10 — 89
Front door hinge bolts 25 18 —
Front door latch assembly bolts 10 — 89
Front door latch striker bolts 28 18 —
Front door regulator carrier plate bolts 10 — 89
Front door reinforcement bolts 21 15 —
Front door striker bolts 25 18 —
Front seat back mounting bolts 20 15 —
Front seat back stop bolt 20 15 —
Front seat mounting bolts 25 18 —
Hood hinge bolts/nuts 23 17 —
VA BODY 23 - 11
To Next Page
Loading...
