(16) Remove left outer a nd inn er air n ozzles.
(17) Remove right side cover.
(18) Remove right outer an d inner a ir nozzles.
(19) Remove protective matting fr om clu st er loca-
tion. (Fig. 14)
(20) Remove instrumen t pan el top cover screws
and cover. (F ig. 15)
(21) Remove vent hose. (F ig. 16)
(22) Remove brake peda l spring. (Fig. 17)
Fig. 13 SIDE COVERS & NOZZLES
1 - LEFT SIDE COVER
2 - RIGHT SIDE COVER
3 - BRACKET
4 - OUTER AIR NOZZLE
5 - INNER AIR NOZZLE
6 - INNER AIR NOZZLE
7 - OUTER AIR NOZZLE
Fig. 14 PROTECTIVE MAT
1 - CLUSTER OPENING
2 - PROTECTIVE MAT
Fig. 15 INSTRUMENT PANEL TOP COVER
1 - SPEAKER COVERS (2)
2 - CENTER NOZZLE COVER
3 - INSTRUMENT PANEL TOP COVER
4 - TOP SCREWS (6)
5 - BRACKET/SCREW
6 - LOWER SCREWS (2)
Fig. 16 CENTER VENT HOSE
1 - VENT HOSE
2 - CENTER STACK
VA INSTRUMENT PANEL 23 - 61
To Next Page
Loading...
