HORN
TAB LE O F CO NTE NTS
page page
HORN
REMOVAL .............................1
INSTALLATION ..........................1
HORN SWITCH
REMOVAL .............................1
INSTALLATION ..........................1
HORN
REMOVAL
(1) Disconn ect and isolate the battery nega tive
cable.
(2) Disconn ect the wire har ness connectors.
(3) Remove the mounting fasten er and h orns.
INSTALLATION
(1) Position horns and install mounting fasten ers.
(2) Connect wire har ness connector.
(3) Connect batt ery n egat ive cable.
HORN SWITCH
REMOVAL
(1) Disconn ect and isolate the battery nega tive
cable.
(2) Remove th e drivers side airbag (Refer to 8 -
ELECTRICAL/RESTRAINTS/DRIVE R AIRBAG -
REMOVAL).
(3) Remove the electrical har ness connector.
(4) Remove the m ounting fasten ers a nd horn
switch .
INSTALLATION
(1) Connect the wire harness connector.
(2) Position the horn switch and insta ll th e mount -
ing fasteners.
(3) In st all t he driver s side airba g (Refer to 8 -
ELECTRICAL/RESTRAINTS/DRIVE R AIRBAG -
INSTALLATION).
(4) Connect the batt ery n egat ive cable.
VA HORN 8H - 1
To Next Page
Loading...
