Dynex DSX - 2.5 Loading the Application

Loading the Application
2-2 DSX™ System Service Manual
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2.5 Loading the Application
The DSX™ Automated ELISA System can be used with the following operating systems (this
information can change with the release of any new version of software so it is best to review
the software notes or any bulletins regarding current specifications):
Windows 2000
Windows NT 4.0 (Service Pack 6)
The personal computer should have the following minimum configuration:
2.4 GHz processor
256 MB RAM
15" SVGA Monitor with a minimum screen display of 800 x 600 pixels
256-color video
10 GB hard disk
CD-ROM Drive with CD burner
3.5” 1.44 MB floppy disk drive
Mouse and Keyboard
9 pin Serial Port
Optional equipment:
Sound card and speakers (recommended)
Printer (B/W or Color)
A local or network printer can be used
Uninterruptible Power Supply

Note: Running the application software on a laptop computer may result in the
incorrect display of processed results. The results and printout of the results are
unaffected.
The application software is supplied on a CD-ROM disk.
•
•
If the operating system is configured with the Autoload feature, the Welcome screen is
automatically presented.
If the operating system is not configured with the Autoload feature, select Run on the
Start menu to present the Run dialog box. Press the Browse button, locate Setup on
the CD and press Run to access the Welcome screen of the application.