Overview
DSX™ System Service Manual 3-1
•
•
Chapter 3 Maintenance and Introduction to Service
3.1 Overview
This chapter describes:
User Maintenance – Routine maintenance, cleaning and decontamination activities
that should be performed by the user. While this material is included in the user's
manual, it is included here as the service engineer may be required to perform these
activities from time to time.
Cleaning and Decontamination – General comments about servicing the unit.
A detailed discussion about troubleshooting is presented in Chapter 4 (Troubleshooting).
WARNING: THE SAMPLES, REAGENTS, WASH SOLUTION AND/OR
THE ASPIRATED WASH SOLUTION MAY CONTAIN TOXIC
MATERIALS OR BIOHAZARDS. THE SERVICE ENGINEER MUST
ASSUME THAT THESE LIQUIDS AND ANY COMPONENTS THAT
COME IN CONTACT WITH THEM ARE HAZARDOUS.
ENSURE THAT THE SYSTEM HAS BEEN DECONTAMINATED OR
TAKE SUITABLE PRECAUTIONS (e.g., WEAR RUBBER GLOVES AND
SUITABLE EYE PROTECTION).
IF THE SYSTEM IS SENT BACK TO A DYNEX TECHNOLOGIES
FACILITY, THE USER MUST CERTIFY THAT THE UNIT HAS BEEN
DECONTAMINATED.
To Next Page
Loading...
