Dynex DSX - 15.4 Servicing Internal Components

Servicing Internal Components
15-4 DSX™ System Service Manual
15.4 Servicing Internal Components
15.4.1 The Drive Mechanism
The ambient drawer is positioned via a drive belt that is powered by a motor. To remove the
drive belt, loosen the two screws that secure the idler pulley and tensioning bracket and then
unscrew and remove the belt bracket (Figure 15-2).
Belt Bracket
Drive Belt
Idler Pulley
Tensioning
Bracket
Figure 15-2 Timing Belt Bracket, Idler Pulley, and Tensioning Bracket