Overview
DSX™ System Service Manual 16-1
Chapter 16 Mechanical System Components
This chapter describes how the service engineer can replace or service various components
that are related to overall system operation that are generally of a mechanical nature (e.g. the
Cover Hinges). It should be noted that some items are directly associated with a specific
module but are not physically inside the module (e.g. the vacuum sensor is associated with the
washer module); such items are discussed in the chapter describing the module. A similar
chapter (Chapter 17) discusses the replacement/service of items of an electrical/electronic
nature.
16.2.1 Removing the Top Cover
16.1 Overview
The DSX™ Automated ELISA System is an integrated system that includes a number of
dedicated modules for specific tasks such as pipetting, incubation, monitoring of absorbance,
etc. Each module can be readily removed for service or replacement. Servicing of these
modules (and related components such as the filter for the washer module) is described earlier
in this manual.
Servicing of the components described in this chapter require that the external covers of the
system be removed.
16.2 Accessing Internal Components
The top cover (Part No. 22001230) is shown in Figure 16-1.
Figure 16-1 Top Cover
To Next Page
Loading...