Overview
6-2 DSX™ System Service Manual
The service engineer is expected to be able to replace a number of components of the
X-Drive, Y-Drive, and Z-Drive such as the drive belts, motors, transition boards, etc. In the
event of a failure in the Pipette Module, the entire pipette module is to be replaced. A
discussion of the various repair/replacement activities is presented in Chapter 7 that includes
troubleshooting information.
The X-Drive and Y-Drive components are discussed in the section entitled The X-Drive and
Y-Drive on page 6-3, while the Z-Drive and the Pipette Module are discussed in the section
entitled The Z-Drive and the Pipette Module on page 6-11.
To Next Page
Loading...
