178
Time Zone Setting
The SNTP server provides the UTC (Cooridinated Universal Time). To display the correct
local time, set your time zone.
(1) Open [SETUP - SYSTEM - TIME] menu PAGE 2.
(2) Turn F3 to set the time zone offset value.
SYSTEM :1st CHK:SUMMER :TIME ZONE : 2/4
TIME : =OFF : =OFF : =UTC[ 0:00] :
Manual Time Update
(1) Open [SETUP - SYSTEM - TIME] menu PAGE 3.
(2) Press F4. A short-beep sound will be heard and the switcher time will be updated.
SYSTEM :SNTP SERVER IP ADDRESS :UPDATE : 3/4
TIME : =192.168.000.011 : >EXEC :
Automatic Time Upade
To update time at the switcher start-up:
Set 1st CHK to ON in [SETUP - SYSTEM - TIME] menu PAGE 2.
SYSTEM :1st CHK:SUMMER :TIME ZONE : 2/4
TIME : =ON : =OFF : =UTC[ 9:00] :
To update time at the fixed time:
Set the update time under UPDATE TIME in [SETUP - SYSTEM - TIME] menu PAGE 4.
The INTRVL (INTERVAL) parameter allows you to set OFF, 1HOUR, 3HOUR, 6HOUR,
12HOUR and1DAY, and to update the time at the set interval starting from the time set in the
UPDATE TIME.
SYSTEM :UPDATE TIME :INTRVL : : 4/4
TIME : =12:00 :=3HOUR : :
Summer Time Setting
The SUMMERT is set to ON in [SETUP - SYSTEM - TIME] menu PAGE 4, the time will be set
one-hour advanced in relation to the standard time.
SYSTEM :1st CHK:SUMMER :TIME ZONE : 2/4
TIME : =ON : =ON : =UTC[ 9:00] :
To Next Page
Loading...
Need help?
General
