FOR-A HVS-390HS User Manual

86
9-5. How to Reset the WIPE Menu
To Reset a Modified Pattern using the WIPE PATTERN Menu:
(1) Press PATTERN in the TRANSITION block to display the [WIPE PATTERN] menu. The
letter "M" appears in front of the modified pattern.
WIPE :BKGD :KEY1 :KEY2 : 1/1
PAT M1 :00 :M20 :00 :
(2) Press and hold down F2 to reset Pattern 20 in the above example.
To Reset a Modified Pattern using User Buttons:
(1) Assign the reset function of the WIPE menu (OTHER - WIPE MOD BKGD RESET, WIPE
MOD KEY1 RESET or WIPE MOD KEY2 RESET) to a USER button.
(2) Press a set USER button. All parameters for the selected bus in the WIPE menu are returned
to factory default settings. (See section 0. "USER Button.")
To Reset a Part of the Modified Pattern using the WIPE Menu:
The INIT items in the menu allows the user to reset a submenu respectively in the WIPE menu.
(1) Press the WIPE CHANNEL button to turn on the lamp of the bus where the pattern is used.
(2) Press MENU in the CONTROL block.
(3) Press WIPE in the Keypad to display the [WIPE] menu.
(4) Turn F1 to select INIT. And then press and hold down F1 for a while.
ME1 WPBG:>BORDER >POS/ASP >CROP >SUB EFF
No.117 :>CG WIPE >INIT
(5) Turn F1 to select the parameter group you want to reset under INIT. Press F1 to reset the
selected parameter values.
ME1 WPBG:INIT : : 1/1
INIT :=BORDER: :
WIPE CHANNEL
BKGD
KEY1
KEY2
SELECT / KEY PAD
5
2
RECALL
PASTE
4
1
6
3
DEC
BLA CK
TRANS
SEQUENCEEVENTWI PE
MACRO
CONTROL
MEMORY
MENU USER BUTTON COPY/SWAP SEQ EDI T
987
ATTACH
INC
MENU
COPY
STILL MATT
SWAP NEW
FILE
INS
KEY4KEY3KEY2KEY1
DET TACH
KEYER
(2D DVE)
ROTPOSWIPE POS
MENU FINE DEF
JOYSTICK
ADDDELCUTPLAY
+/-
CL EAR
WIPE
STOP
0
COPY
S T ORE
ENTER
OVWR

FOR-A HVS-390HS Specifications

General

Brand	FOR-A
Model	HVS-390HS
Category	Switch
Language	English