43
WEB CONTROL
19. Backing Up Settings
>> Manual Sec. 4-5. "How to Back up Settings"
Either of following two operations backs up panel settings and loads them automatically at startup.
It is recommended to do either operation after changing menu settings.
Rebooting (Be sure to reboot the switcher instead of turning the power off then on.)
(See Sec. 6-1. "SETUP - SYSTEM.")
Saving an event. (See Sec. 4 "EVENT.")
When moving to another page after having changed any of the following menu settings, all menu
data are automatically stored as a backup.
All SETUP menu settings
All EXT I/F menu settings
All USER BUTTON menu settings
Overwrite-protection for each event, sequence and direct pattern.
Each macro overwrite-protection and file name.
To Next Page
