243
Appendix 1. Supported Files
Menu Setting Files and Image Files (via USB flash memory or Ethernet connection)
File Extension File Name (*1) File Data Description
all DATA.all System data, all wipe data and event memory data
sys HVS390.sys System data
mem EVENT.mem All event memory data
seq SEQDAT**.seq Each sequence data
mcr MACRO.mcr All macro data
jpg (*2) *.jpg
JPEG images (standard RGB)
JPEG sequential images
STILL1.jpg to STILL4.jpg Stored still images in JPEG format
tga (*2) *.tga
8-, 24- and 32-bit TARGA images (uncompressed
RGB and RLE encoded)
TARGA sequential images
STILL1.tga to STILL4.tga Stored still images in TARGA format
bmp (*2) *.bmp
24-bit BITMAP images (uncompressed RGB)
BITMAP sequential images
STILL1.bmp to STILL4.bmp Stored still images in BITMAP format
Note that file names are limited to max. 8 characters in length (ASCII code).
(*1) Files are automatically named to their correct name as shown in the table above when saving to
USB flash memory.
(*2) When loading a jpeg, targa or bitmap file from USB flash memory, you can select a centered or
tiled format as well as a normal one. In such case, a centered or tiled format image file is saved to
STILL as a jpg, tga or bmp file.
Factory Tested USB Flash Memory Drives
Manufacturer Series Name Model Name
SanDisk Cruzer micro, Cruzer mini Series SDCZ2-256
I/O DATA TB-ST Series ToteBag
Transcend JetFlash150 Series
TOSHIBA TransMemory Series U2B-256MT
To Next Page
Loading...
