24
WEB CONTROL
8. MATT
Click MATT in the HOME screen to display the MATT menu page.
>> Manual (392OU/ROU/WOU) Sec. 5-9. "Bus Matte"
>> Manual(391OU) Sec. 5-10. "Bus Matte"
To Specify Color for MATT1 and MATT2
Select color by setting the HSL values, selecting a preset color or using the color circle.
To set color on the color circle, specify Hue in the outer circle and Luminance and Saturation
on the inner rectangle.
To Specify Gradient Matte (MATT2 only)
(1) Select a start color for the gradadient matte under COLOR1.
(2) Select an end color for the gradadient matte under COLOR2.
(3) Select a pattern for the gradation matte under PATTERN.
(4) Set the position at POSITION and adjust the softness gradient at SOFT.