FOR-A HVS-390HS User Manual

143
17-1-3. Quick Recall (Direct Mode)
The operation example in this section shows how to recall the sequence that was saved to
"Sequence Memory 0" using Direct mode.
(1) Press SEQUENCE to change the Keypad to SEQUENCE
mode.
(2) Press 0 to select "Sequence Memory 0." A "beep" sound
will be heard and the data that was saved in "Sequence
Memory 0" is recalled.
Before recalling sequences
, Direct mode should be
enabled in the following way.
Setting Direct Operation Mode to ON
(1) Press SEQUENCE to display the [SEQUENCE MEMORY]
menu.
(2) Turn F1 to set DIRECT to ON.
SEQUENCE:DIRECT : STEP->--/-- LOOP->--- : 1/2
MEMORY : =ON : TIME->----/---- :
SELECT / KEYPAD
5
2
RECALL
PASTE
4
1
6
3
DEC
SEQUENCEEVENTWIPE MACRO
CON TROL
MEMORY
MENU USER BUTTON COPY/SWAP SEQ EDIT
987
ATTACH
INC
MENU
COPY
STILL MATT
SWAP NEW
FILE
INS
KEY4KEY3KEY2KEY1
DETTACH
ADDDELCUTPLAY
+/-
CLE AR
WIPE
STOP
0
COPY
STO RE
ENTER
OVWR

FOR-A HVS-390HS Specifications

General

Brand	FOR-A
Model	HVS-390HS
Category	Switch
Language	English