62
Press AUX1 in the BUS SELECT-AUX block and select IN01 on the AUX/KEY bus:
>> IN02 is assigned to AUX2, IN03 to AUX3 and IN04 to AUX4.
Press AUX7 in the BUS SELECT-AUX block and select M/E1 PGM:
>> M/E1 PREV is assigned to AUX8.
Select IN05 in M/E2-PGM bus:
>> STL1 is assigned to M/E2 KEY1-INSERT and STL2 to M/E2 KEY2-INSERT.
Select IN06 in M/E1- A bus:
>> IN07 is assigned to M/E1-B bus
Select IN10 in M/E1 -PGM bus:
>> IN11 is assigned to M/E1 KEY3 and IN12 to M/E1 KEY4.
To Next Page
Loading...
Need help?
General
