K117sm1e1
1-10
1. 5 Specifications for Scan Original
A scan original must satisfy the following specifications.
Thickness 0.05mm to 1.60mm
*1 *2
Width 210mm to 914.4mm
Length 210mm to 6,000mm *3
*1. If an original is thicker than 0.65mm, its image quality is not guaranteed even it is transported. (Old Scanner)
*2. Image quality for an original with 0.25mm or thicker is guaranteed only in a standard size even the scanner physically accepts it.
(New Scanner)
*3. Image quality for an original over 6,000mm in length is not guaranteed.
Do not scan the following kinds of original, because you may damage the original or scanner itself!
Sticked with paste
Torn
Folded (Leading edge)
So much curled
(Diameter is smaller than
80mm.)
Paste
To Next Page
Loading...
