KIP 700m - BUD Descriptions; 0 Lead Regist; 1 T Margin; 3 Motor Correction

K117sm8eE
8-189
BUD Descriptions
0 Lead Regist
BUD No.0 is to shift the start timing of reading.
Increasing the value moves the start timing to the trailing edge side. (reading starts later)
Decreasing he value moves the start timing to the leading edge side. (reading starts earlier)
setting range step of increment
0 to 60 0.1mm
1 T Margin
BUD No.1 is to shift the stop timing of reading.
Increasing the value moves the stop timing to the trailing edge side. (reading stops later)
Decreasing he value moves the stop timing to the leading edge side. (reading stops earlier)
setting range step of increment
0 to 200 0.1mm
3 Motor Correction
BUD No.3 is to compensate the Document Motor.
setting range
400 to 600
4 Offset Level
BUD No.4 is a parameter for the definition of the Black Level.
setting range
20 to 100
NOTE
Auto adjustment features uses many parameters here.
A setting change on grayed items may malfunction the auto adjustments as intended.
NOTE
Factory adjusted. Keep the value unchanged.
NOTE
Fixed value. Keep the value unchanged.