KIP 700m - 613 to 616 Judgment value for Additional Cut Length for Non-standard Size Prints

K117sm8e7
8-65
613 to 616 Judgment value for Additional Cut Length
for Non-standard Size Prints
It is possible to avoid the lack of trailing image on the non-standard size print, by providing
additional paper length by service modes 617 to 620 (Additional Cut Length for non-standard size
print).
Additional Cut Length specified by service mode 617 to 620 is not always provided.
Whether or not it is provided is judged by service mode 613 to 616 (Judgment value for “Additional
Cut Length for non-standard size print”.)
Item
No.
Setting Item Setting
range
Step of
increment
613 Judgment value for Additional Cut Length for Non-standard
Size Prints (36”/ 34”/ 30”/ A0 / B1)
1 to 20 1mm
614 Judgment value for Additional Cut Length for Non-standard
Size Prints (24”/ 20”/ A1)
1 to 20 1mm
615 Judgment value for Additional Cut Length for Non-standard
Size Prints (18”/ 17”/ 15”/ A2)
1 to 20 1mm
616 Judgment value for Additional Cut Length for Non-standard
Size Prints (12”/ 11”/ A3)
1 to 20 1mm
Reference
(1) Which Judgement Value / Additional Cut Length setting is applied to a non-standard size
print depends on the corresponding roll width.
Roll Width Standard Size Standard Cut Length
Judgement
Value
Additional
Length
36" 36"x48" 1219mm
No.613 No.617
841mm A0 1189mm
34" 34"x44" 1118mm
30" 30"x42" 1067mm
728mm B1 1030mm
24" 24"x36" 914mm
No.614 No.618
22" 22"x34" 864mm
594mm A1 841mm
18" 18"x24" 610mm
No.615 No.619
420mm A2 594mm
17" 17"x22" 559mm
15" 15"x21" 533mm
12" 12"x18" 457mm
No.616 No.620
11" 11"x17" 432mm
297mm A3 420mm
(next page)