K117sm6e1
6-2
6. 1 Recommended
Periodic Replacement Parts
For keeping the machine quality in a satisfactory level, a periodic replacement for the following
parts is recommended for “Preventive Maintenance (PM)”.
A damaged part (even if it looks not) may result in a critical failure.
Part Name Part Number Remarks
Service Kit A
1476
Z178080050
Image Corona, Transfer / Separation Corona, Filters,
Pads (2 pcs), Nail Cleaning Jig
Service Kit B
3424
Z178080060
Image Corona, Transfer / Separation Corona, Filters,
Developer Unit, Pads (2 pcs), Nail Cleaning Jig,
Toner Bottle (2 bottles)
Service Kit C
3571
Z178080070
Transfer / Separation Corona, Filters, Developer Unit,
Process Unit (includes Image Corona, Drum), Pads (2 pcs),
Nail Cleaning Jig, Toner Bottle (2 bottles)
The KIP 700m incorporates a Service Part Replacement Notification system. This can be disabled
in the “Service” settings on the touch screen (under “?”) if the notification is not desired.
Notification on the UI screen is to occur at the designated intervals.
The UI screen notification system requires a “count reset” once a Kit is installed (if the system is
enabled).
1. The notification window appears. Æ Press [RESET].
If the window disappears, enter the service mode and scroll page to [Service Configuration 7/7].
Æ press [Reset].
Notification Window Status on Service Mode
To Next Page
Loading...
