KIP 700m - 029 to 034 Transfer Voltage; 035 Separation Corona ON Timing

K117sm8e6
8-55
029 to 034 Transfer Voltage
It is possible to adjust the analog voltage outputted to the Transfer Corona during the print cycle.
Item No. Setting Item Setting
range
029 Transfer Corona Analog Voltage (Plain paper) 0 to 4FF
030 Transfer Corona Analog Voltage (Tracing paper) 0 to 4FF
031 Transfer Corona Analog Voltage (Film) 0 to 4FF
032 Transfer Corona Analog Voltage
(Special media / Plain paper)
0 to 4FF
033 Transfer Corona Analog Voltage
(Special media / Tracing paper)
0 to 4FF
034 Transfer Corona Analog Voltage
(Special media / Film)
0 to 4FF
035 Separation Corona ON Timing
It is possible to adjust the timing that the Separation Corona starts discharging during the print
cycle.
If you increase the setting value by “+1”, the timing to start discharging is 1mm delayed.
Setting range Step of increment
0 to 100 1mm
NOTE
Please adjust Transfer Corona Analog Voltage while checking the actual voltage with the
multi-meter.