KIP 700m - 8. 11. 1 Special Operation List

K117sm8e9
8-110
8. 11. 1 Special Operation List
Item No. Name Contents
0000 RAM Clear Clears any stored data in the memory
0001 Error Clear Clears E-0000 / 0001 / 0002 / 0003 / 0004
from the memory
0002 Jam History Clears Jam records J-**** in Jam History list
0003 Error History Clears Error records E-**** in Error History list
0004 Print Count Checks the counter value for Print Count (unit selectable)
0005 Total Count Checks the counter value for Total Count (linear meter)
0006 Dev. Clear Initializes Developer / Regulation Bias adjusted with
Density Compensation Process
0007 Toner Supply1 Starts toner supply / agitation in Developer Unit
0008 Info Data Clear Clears the Items 0009 to 0027 at a time
0009 Total Cut Clears each Item used in Information Mode
0010 Roll1 Cut See [8.4 Information Mode]
0011 Others Cut
0012 Total Image
0013 Manual1 Image
0014 Roll1 Image
0015 Cassette Image
0016 Roll1F CL
0017 Feed CL
0018 Reg. CL
0019 Guide CL
0020 Cassette CL
0021 Pickup SL
0022 NC (Reserved)
0023 NC (Reserved)
0024 Motor1 Time
0025 Motor2 Time
0026 LED Head on Time
0027 Image Ratio
0028 NC (Reserved)
0029 PM Count1 Checks the remainder counter for Service Kit A
0030 PM Count2 Checks the remainder counter for Service Kit B
0031 PM Count3 Checks the remainder counter for Service Kit C
0032 PM Count4 (Reserved)
NOTE
Total Count (0005) and Print Count (0004) are stored on both PW11720 and the IPS. The
counting memory is always verified between them. If you replace one of them, the other
will automatically override the Count memory to the replaced component.