K117sm7e1
7-1
Chapter 7
Troubleshooting
Page
7. 1 Troubleshooting - Printer Errors 7- 3
7. 1. 1 Countermeasures - Call Operator Errors 7- 3
7. 1. 1. 1 J-0103 / 0203 Roll Deck Feeder Jam 7- 3
7. 1. 1. 2 J-0104 / 0204 / 1004 Registration Jam 7- 4
7. 1. 1. 3 J-0105 / 0205 / 1005 Process Unit Jam 7- 4
7. 1. 1. 4 J-0106 / 0206 / 1006 Fuser Jam 7- 4
7. 1. 1. 5 Deck Jam 7- 4
7. 1. 1. 6 Manual Set NG 7- 4
7. 1. 1. 7 J-1300 / 1400 Door Open while printing 7- 4
7. 1. 1. 8 Toner Empty 7- 7
7. 1. 1. 9 Roll Empty 7- 7
7. 1. 2 Countermeasures - Call Service Errors 7- 8
7. 1. 2. 1 E-0000 / 0002 / 0004 Fuser Error 7-10
7. 1. 2. 2 E-0001 Fuser Error 7-11
7. 1. 2. 3 E-0003 Fuser Error 7-12
7. 1. 2. 4 E-0005 Fuse Error 7-12
7. 1. 2. 5 E-0010 Main Motor Error 7-13
7. 1. 2. 6 E-0013 Paper Tray Motor Error 7-13
7. 1. 2. 7 E-0020 Counter Error 7-14
7. 1. 2. 8 E-0031 / 0032 / 0033 High Voltage Output Error 7-14
7. 1. 2. 9 E-0034 Bias Output Error 7-15
7. 1. 2.10 E-0040 Cutter Error 7-15
7. 1. 2.11 E-0050 FPGA Error 7-16
7. 1. 2.12 E-0070 Developer Error 7-16
7. 1. 2.13 E-0080 / 0081 Density Sensor Error 7-16
7. 1. 2.14 E-0090 Eraser LED Error 7-16
7. 2 Troubleshooting - Image Quality Defects 7-17
7. 2. 1 Basic Image Adjustment 7-17
7. 2. 2 Countermeasures - Image Quality Defects 7-18
7. 2. 2. 1 Halftone is too light 7-18
7. 2. 2. 2 Halftone and solid black are too light 7-19
7. 2. 2. 3 The whole image is extremely light 7-20
7. 2. 2. 4 Density is uneven 7-21
7. 2. 2. 5 Totally appeared foggy image 7-21
7. 2. 2. 6 Foggy image or blurred black wide line (vertical) 7-22
7. 2. 2. 7 Clear black thin line (vertical) 7-22
7. 2. 2. 8 White line (Vertical) 7-23
7. 2. 2. 9 Void of image 7-24
7. 2. 2.10 Dirt on the back of the print 7-25
7. 2. 2.11 Defective fusing 7-25
7. 2. 2.12 Defective image placement, No Leading Edge 7-26
7. 2. 2.13 Jitter 7-26
7. 2. 2.14 Image looks not sharp 7-27
7. 2. 2.15 Uneven image density (vertical) 7-27
7. 2. 2.16 Completely white (No image) 7-28
7. 2. 2.17 Completely black 7-28
7. 2. 2.18 Crease of paper 7-29