KIP 700m - 788 Transfer Corona OFF Timing (Paper Tray)

K117sm8e7
8-86
788 Transfer Corona OFF Timing (Paper Tray)
It is possible to adjust the timing that the Transfer Corona stops discharging during the print cycle.
If you increase the setting value by “+1”, the timing to stop discharging is 1ms delayed.
Setting Range Step of increment
1 to 999 1millisecond
NOTE
You may lose some trailing image as the following example if you decrease the setting value
too much, because the Transfer Corona stops discharging too early.
Normal Setting value is increased too much.
Transfer Corona stops
discharging at this point.