KIP 700m - 8. 1 General Information of Service Mode

K117sm8e2
8-1
8. 1 General Information of Service Mode
The system is equipped with advanced functions for field service to easily achieve its best
performance.
Service Mode contains the following categories.
- Signal Status Mode
- Information Mode
- Operation Check Mode
- Adjustment Mode
- Running Mode
- Jam/Error Mask Mode
- Test Print Mode
- Factory Adjustment Mode
- Special Operation Mode
- Send Firmware Mode
Reference
“KIP Service Software” acts as an interface for service technicians to efficiently utilize any
functions in Service Mode.
For further information about how to operate KIP Service Software, see the next page.
NOTE
The screenshot images in Chapter 8 may vary by KIP printer model / system configuration /
software version.
Shown with available options.