KIP 700m - 15 Stitch Setting1; 16 Stitch Setting2; 19 Ind. Language

K117sm8eE
8-192
15 Stitch Setting1
BUD No.15 is a mode selector for “fade transition stitch” at CIS borders. This is to diminish visual
density gap between CIS. This is effective for scanning with filters for Color, Grayscale, mono
“Photo”.
setting value Contents
0 OFF (Select “0” before starting Stitching Adjustment)
1 ON1: not supported
2 ON2 / without Black Brightness Correct (default for Firmware M14 S16 and before)
3 ON3: not supported
4 ON4 with Black Brightness Correct (default for Firmware M15 S17 and after)
16 Stitch Setting2
BUD No.16 is a mode selector for feed speed compensation.
setting value Contents
0 Feed speed constant
1 Feed speed compensated according to No.70 - 117.
19 Ind. Language
BUD No.19 is a reserved setting for developers.
NOTE
Stitching Adjustment should be done with BUD No.15 set to “zero”.
Be sure to reset it to “the original value” after Stitching Adjustment is done.
NOTE
Factory adjusted. Keep the value unchanged.
NOTE
Reserved. Keep the value unchanged.