KIP 700m - 66 Overlap Image; 67 Special Scan; 68 Strobe Level; 70 - 117 Stitch Adjust

K117sm8eE
8-196
66 Overlap Image
BUD No.66 is a reserved parameter for Stitching Adjustment.
67 Special Scan
BUD No.67 is a reserved parameter for Shading.
68 Strobe Level
BUD No.68 is a reserved parameter for “white level correction”.
70 - 117 Stitch Adjust
BUD No.70 to 117 are a parameter for feed speed compensation.
BUD No. Name Setting
Range
70 - 85 Stitch Adjust 1 - 16 0 to 200
Feed speed compensation for front roller solo feeding
86 - 101 Stitch Adjust 17 - 32
Feed speed compensation for front & rear rollers combi feeding
102 - 117 Stitch Adjust 33 - 48
Feed speed compensation for rear roller solo feeding
NOTE
Reserved. Keep the value unchanged.
NOTE
Reserved. Keep the value unchanged.
NOTE
Reserved. Keep the value unchanged.
NOTE
Factory adjusted. Keep the value unchanged.