KIP 700m - 8. 9 Test Print Mode

K117sm8e8
8-103
8. 9 Test Print Mode
It is possible to output some built-in test patterns as a stand alone plotter.
No external device (controller / scanner / network connection) is required for test pattern plotting.
Basic Setting screen
Name Function
1 Deck Displays media source in drop-down menu
Choose one item that you want to use for test print.
2 Width Displays media width of the selected media source in drop-down
menu
You can set a different width from the actual media.
3 Length Displays print length of the test print in drop-down menu
Specify one item for test print.
4 Magnification The print length will extend n times specified in “Magnifying”.
5 Media Type Displays media type in drop-down menu
Specify one media type of the selected media source.
6 Image Pattern Displays built-in image pattern number in drop-down menu
Specify one pattern that you want to plot.
7 Pattern Switch Specify a size code for the size of “repeated patterns” in a test
print image. (ex. band pattern width, grid square size, etc)
8 Number of Sheet Displays the number of sheets to be plotted
You can change the number by using On-screen Keypad.
9 Start Starts the configured test print
10 Option Switches to Option screen
11 Back Returns to Service Mode Home
11 9
8
7
6
510
1
2
3
4