KIP 700m - Page 408

K117sm8e7
8-66
Reference
(2) If the actual image length is longer than (or equal to) “A+B”, “C” is provided to the trailing
edge of non-standard size print.
A: Standard Cut Length (depends on roll width)
B: Value of “Judgement Value for “Additional Cut Length for Non-standard Size Prints”
C: Value of “Additional Cut Length for Non-standard Size Prints”
<Example> Actual Image Length: 860mm
A: 841mm (A1 roll width)
B: 10
C: 20
A (841mm) B (10)
Actual Image Length (860mm)
Print Length (880mm)
Actual Image Length (860mm) C (20)
(3) If the actual image length is shorter than “A+B”, the print is cut as long as the actual
image length. (“C” is not provided to the trailing edge of the print.)
A: Standard Cut Length (depends on roll width)
B: Value of “Judgement Value for “Additional Cut Length for Non-standard Size Prints”
C: Value of “Additional Cut Length for Non-standard Size Prints”
<Example> Actual Image Length: 845mm
A: 841mm (A1 roll width)
B: 10
C: 20
A (841mm) B (10)
Actual Image Length (845mm)
Print Length (845mm)