K117sm8e6
8-52
2. Make an A1 (841mm long) or 34” long print.
Measure the actual length of this A1 or 34” print to know how long millimeter it is shorter than
expected.
(Example: Print out is 838mm, so it is 3mm shorter than expected.)
Expected length Actual length
A1 or 34”
3mm
3. Necessary value for the compensation is 10 times as long as the difference between actual
length and expected length
.
It is “30” in this example. (3mm x 10 = 30)
Specify “30” as the setting value of No.018.
4. Make a long print.
The actual print out will be as long as expected.
Expected length Actual length
0
100
50
A
B
C
0
100
50
A
B
C
To Next Page
Loading...
